knowledge about the development status of sun tracking solar panel devices and techniques and the principles and applications of solar panel tracker and sun tracker accessories
The development status of solar tracking device and technology, as well as the principle and application of solar tracking device are introduced.
The energy conversion device for photovoltaic power generation is a photovoltaic cell, which is an active element for power generation. It uses the photovoltaic effect to directly convert light into electrical energy, so that the object under the action of the light generates an electromotive force in a certain direction. When sunlight (or other light) […]
The control component chooses AT89C52 single-chip microcomputer produced by ATMEL company. AT89C52 is a low-power, high-performance 8-bit microcontroller with 4KB of Flash programmable and erasable read-only memory on-chip. It uses CMOS technology and high-density non-volatile memory (NURAM) technology, and the pins and instruction system are compatible with MCS-51. The on-chip Flash memory allows reprogramming in […]
Control system circuit diagram The execution part is a stepping motor, the feedback control part is a photoelectric sensor, and the control part is a single-chip microcomputer. The schematic diagram of the circuit is shown in Figure 1, which is the connection method of the entire control system. The power supply and the partially repeated […]
(1) Pulse distribution (that is, power-on commutation control) There are two types of pulse distribution methods: software method and hardware method. The software method is a completely software method, in accordance with the given power-on commutation sequence, the control pulse is sent to the drive circuit through the I/0 of the single-chip microcomputer. The software […]
The single-chip microcomputer control motor has the advantages of flexible and diverse functions, low inertia, fast speed, accurate pulse output, strong real-time performance, strong anti-electromagnetic characteristics and strong anti-interference ability, which is the future development direction. The working process of a stepper motor is generally controlled by a controller. The controller completes a certain control […]
This article is mainly to study the control part of a mechanical device that can track the sun’s movement, and realize the tracking of the sun’s azimuth and declination through the control mechanism, so as to achieve the purpose of maximizing the use of solar energy. The principle of the control system is: according to […]
Heat dissipation protection device As shown in Figures 1 and 2, the solar light receiving device also includes a heat dissipation protection device 3 fixed on the back of the solar silicon wafer, which can realize timely heat dissipation, and can also avoid rain erosion, dust, bird droppings and other dirt from accumulating on the irradiated […]
As shown in Figure 1, the light superimposed reflection device has a three-layer or more than three-layer ring structure, that is, the first and last mirrors of each layer are connected end to end. From the inside to the outside, the mirror unit of the first layer is a trapezoid or oblique plane. The oblique […]
Basic requirements for the mechanism design of sun tracking device The carrier of the photovoltaic power generation solar tracking device is the solar panel, the panel area is relatively large, and the force required to drive it is relatively large. Considering that the tracking platform drives a larger battery panel to work when the input […]
The solar automatic tracking concentrating photovoltaic power generation system controlled by a single-chip microcomputer has the characteristics of high tracking accuracy, large tracking range, and easy real-time control. The system uses a refraction condenser to condense a larger area of sunlight in a smaller area to form a focal spot or focal zone, and place […]